Icom IC-F9011 Instruction Manual 1 - Page 13

PANEL DESCRIPTION 2 D For All types (Different operation with Non-display type) 1 When the following key functions are programmed to Nondisplay type, the key functions may be limited and some key SURVEILLANCE KEY "SURV" When this function is turned ON, the beep is not emitted and 2 functions should be operated differently from Simple and the LCD backlight does not light when a signal is received or 3 10-key types. a key is pushed. ❍ For Simple/10-key types 4 HIGH/LOW KEY "H/L" Push to turn the surveillance function ON or OFF. 5 Push to select the transmit output power temporarily or per- manently, depending on the pre-setting. ❍ For Non-display type 6 • Ask your dealer for the output power level for each selection. • Emits one beep when Low 1 is selected, two beeps when Low 2 is ➥ P ush and hold for 1 sec. to turn the surveillance function ON. 7 selected and three beeps when High is selected. (Non-display type ➥ W hen the surveillance function is ON, push to turn the 8 only) function OFF. 9 SCAN KEY "SCAN" ❍ For Simple/10-key types TALK AROUND KEY "TA" (Conventional operation only) 10 The talk around function equalizes the transmit frequency to ➥ Push to start and cancel scanning operation. the receive frequency for transceiver-to-transceiver commu- 11 • When the Power ON Scan, Auto Scan, or Rotary Selector Home function starts a scan, push this key to cancel the scan. nication. 12 The canceled scan resumes after the specified time period has passed. ❍ For Simple/10-key types Push to turn the talk around function ON or OFF. 13 ➥ Push and hold this key for 1 sec. to indicate the scan list, ❍ For Non-display type 14 then push [CH Up] or [CH Down] to select a desired list. (Depending on the presetting.) ➥ P ush and hold for 1 sec. to turn the talk around function ON. 15 ❍ For Non-display type ➥ W hen the talk around function is ON, push to turn the 16 Push to start and cancel scanning operation. function OFF. • When the Power ON Scan, Auto Scan, or Rotary Selector Home function starts a scan, push this key to cancel the scan. The can- celed scan resumes after the specified time period has passed. • The LED indicator blinks green slowly while scanning. 8