Icom IC-F9011 Instruction Manual 1 - Page 14

2 PANEL DESCRIPTION PRIO A REWRITE AND PRIO B REWRITE KEYS "PRAR" "PRBR" ❍ For Simple/10-key types ➥ Push to select Priority A or Priority B channel. ➥ P ush and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 sec. to rewrite the operating channel as the Priority A or Priority B channel. ❍ For Non-display type Push to select Priority A or Priority B channel. D For Simple/10-key types only Following key functions cannot be programmed to Non-display types. CH UP AND DOWN KEYS "UP" "DOWN" ➥ Push to select an operating channel. When [Rotary selec- tor] selection mode is "operating channel," this function is not available. ➥ P ush to select a scan group after pushing and holding [Scan]. COMPANDER KEY "COMP" The compander function reduces noise components from the transmitted audio to provide clear communication. ❍ For Simple/10-key types Push to toggle the compander function ON and OFF. ❍ For Non-display type ➥ Push and hold for 1 sec. to turn the compander function ON. ➥ W hen the compander function is ON, push to turn the function OFF. ZONE KEY "ZONE" Push this key, then push [CH Up] or [CH Down] to select the desired zone. When [Rotary selector] selects "operating zone," push this key to switch the range of selectable zones. What is "zone"?- Selected channels are assigned to a zone according to how they are to be used in a group. For example, 'Staff A' and 'Staff B' are assigned into a "Business" zone, and 'John' and 'Cindy' are assigned into a "Private" zone. OPT OUT KEYS "OP1" "OP2" "OP3" ❍ For Simple/10-key types Push to control the output signal level from the optional unit connector. USER SET MODE KEY "SET" ➥ Push and hold for 1 sec. to enter user set mode. • During in the user set mode, push this key to select an item that is enabled by your dealer, and change the value or condition by ❍ For Non-display type pushing [CH Up] or [CH Down]. ➥ Push and hold for 1 sec. to control the output signal level ➥ Push and hold this key for 1 sec. again to exit user set mode. from the optional unit connector. ➥ W hen this key function is activated, push to deactivate 9 the function.