Icom IC-M24 Instruction Manual - Page 11

2 SUPPLIED ACCESSORIES AND ATTACHMENTS D Battery pack To remove the battery pack: Slide the latch and then lift the battery cover to remove it. Then remove the battery pack, as shown. Latch Battery cover Battery pack To insert the battery pack: Place the battery pack into the transceiver so it fits flat, and then securely attach the battery cover, as shown. Push the cover until the latch comes back to the locked position. Battery cover "Click" NEVER remove the battery cover when the transceiver is 1 wet or soiled. This may result in water or dust getting into the transceiver/battery pack, and may result in the trans- 2 ceiver being damaged. 3 CAUTION: 4 • When attaching or removing the battery cover, make sure the rubber seal is correctly set in the groove of the cover. 5 If the seal is not correctly in the groove, it may be dam- 6 aged when attaching the battery cover. If the seal is damaged, waterproof protection is not guaranteed. 7 • When attaching the battery cover, make sure dust or 8 other material does not adhere to the rubber seal. If dust or other material is on the seal when attaching the battery 9 cover, waterproof protection may not be guaranteed. 10 Make sure the rubber seal is properly seated in the 11 groove and there is dust or other material is on it. 12 13 14 15 Correct position 16 Incorrect position Battery cover Rubber seal Groove Battery cover 3