Icom IC-M94D Instruction Manual - Page 48
Receiving a Test call, When a Test call is received
View all Icom IC-M94D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
9 DSC OPERATION DDReceiving a Test call NOTE: If the Auto ACK function is set to "Auto," the Test Acknowledgement call is automatically sent to the calling station when the call is received. (p. 42) If the function is set to "Manual," the following screens are displayed. When a Test call is received: ••An alarm sounds. ••"RCVD Test Call" is displayed. 1. Push to turn OFF the alarm. 2. Push the Software Key below for your next operation. : Ignores the call and returns to the operating (Ignore) screen. ••The call is saved in the DSC Log. ••" " blinks continuously until you display the call message. : (Hold) Puts the received call on hold, and returns to the operating screen. LL You can check the DSC calls that are on hold in the Unread List. (p. 41) : Sends a Test Acknowledgement "Able Comply." (Able ••The call is saved in the DSC Log. Comply) : Accepts the call. (Accept) ••Displays the received call's information. ••The call is saved in the DSC Log. ••Push , and then push to send a Test Acknowledgement. (p. 32) ••Push to resend. 39