Icom IC-U86 Advanced Manual - Page 33
Transmitting a DTMF code, Selecting the DTMF code transmission option, Manual DTMF code transmission
View all Icom IC-U86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
8 DTMF MEMORY Transmitting a DTMF code The transceiver has three methods of transmitting a DTMF code sequence. Select the desired option in the Set mode. DDSelecting the DTMF code transmission option 1. Push [FUNC], and then push [SET] to enter the Set mode. 2. Push [Y] or [Z] to select the DTMF TX key item (dmt). 3. Rotate [VOL] to select the desired option. •• "dmt.k": Manual transmission Transmits the appropriate DTMF code assigned to the key. •• "dmt.m": Using DTMF memory Transmits the programmed DTMF code sequence in the DTMF memory channel assigned to the key. •• "dmt.t": Only the 1750 Hz tone burst No DTMF code can be transmitted. However, while holding down [PTT], pushing either [Y] or [Z] transmits the 1750 Hz tone burst. 4. Push [# ENT] to exit the Set mode. DDManual DTMF code transmission 1. Set the DTMF TX key to "dmt.k" in the Set mode. 2. While holding down [PTT], push the desired keys to manually transmit a DTMF code sequence. The "DTMF TX key" item in the Set mode Manual transmission Using DTMF memory Only 1750 Hz tone burst DTMF code assignment "A" Numeric input "B" "C" "D" DDUsing a DTMF memory channel 1. Set the DTMF TX key to "dmt.m" in the Set mode. 2. While holding down [PTT], push the desired DTMF channel number. "*(E)" "# (F)" DTMF memory channel number assignment "dA" "d0" to "d9" "dB" "dC" "dD" "dE" "dF" 8-3