Icom ID-51A Service Manual - Page 24
Dial], Transmit, Power, Idling Current, Transmit Power, Band Low, Band High, Hi Power, Low2 Power
View all Icom ID-51A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
5-3 TRANSMIT ADJUSTMENT (Continued) • TRANSMIT POWER ADJUSTMENT (at 5.5 V) Select an adjustment item using / , and then set the adjustment value as specified using [DIAL]. ADJUSTMENT ADJUSTMENT ITEM OPERATION TRANSMIT POWER -VHF(BAND LOW) (BAND HIGH) [PO5] 1 1) Set the power supply voltage to 5.5 V. 2) Connect an RF power meter to the antenna connector. 2 3) While transmitting, adjust the TX power using [DIAL], and then push to store the adjustment value. 3 -UHF- 4 (BAND LOW) (BAND HIGH) 5 NOTE: When "IDLING CURRENT" is adjusted, "TRANSMIT POWER" must be also re-adjusted. VALUE 80-120 mW • TRANSMIT POWER ADJUSTMENT (at 7.4 V) Select an adjustment item using / , and then set the adjustment value as specified using [DIAL]. ADJUSTMENT ADJUSTMENT ITEM OPERATION TRANSMIT POWER -VHF(Hi power) [BAND LOW] 1 1) Set the power supply voltage to 7.4 V. 2) Connect an RF power meter to the antenna connector. 2 • While transmitting, adjust the TX power using [DIAL], and then push to store the adjustment value. [BAND HIGH] 3 -UHF- 4 (Hi power) [BAND LOW] [BAND HIGH] 5 -VHF- 6 (Mid power) [BAND LOW] [BAND HIGH] 7 -UHF- 8 (Mid power) [BAND LOW] [BAND HIGH] 9 -VHF- 10 (Low2 power) [BAND LOW] [BAND HIGH] 11 -UHF- 12 (Low2 power) [BAND LOW] [BAND HIGH] 13 -VHF- 14 (Low1 power) [BAND LOW] [BAND HIGH] 15 -UHF- 16 (Low1 power) [BAND LOW] [BAND HIGH] 17 -VHF- 18 (S-Low power) [BAND LOW] [BAND HIGH] 19 -UHF- 20 (S-Low power) [BAND LOW] [BAND HIGH] 21 VALUE - 4.8-5.2 W 2.3-2.7 W 0.9-1.1 W 0.4-0.6 W 80-120 mW 5 - 6