Icom IP100H Instruction Manual ver.2.20 - Page 18

Calling procedures outline, Area Call for an Area Call. - headset for

Get Icom IP100H PDF manuals and user guides View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

4 CALLING OPERATION Calling procedures outline [PTT] [Option] Information: When the VOX function or full-duplex mode is set in the Controller, steps 5 and 6 are unnecessary. When the VOX function is set, speak into the headset microphone to transmit, then stop speaking to listen. In full-duplex, you can speak and hear the other person at the same times. 1. Select an address book. (p. 4-3) •• Push [ ] several times. •• Select "All" for all terminals calls, "Group" for group calls, "Talkgroup" for talkgroup calls, "Individual" for individual terminal calls, or "Telephone" for telephone calls. •• Selectable address books may differ, depending on the Controller setting. •• You may select "Talkgroup" by pushing [FUNC], depending on the Controller setting. (p. 4-12) 2. Select an address (ID) or extension number. (p. 4-3) •• Push [J] or [K] several times. •• Selectable IDs or extension numbers may differ, depending on the Controller setting. •• You can select a desired ID or extension number from the call history by pushing [ ]. (p. 4-7) Selectable logs may differ, depending on the Controller setting. 3. If you want to send a message (p. 4-6), or make an area call (p. 4-9), push [FUNC] several times. •• Select "Message" to transmit a message, or "Area Call" for an Area Call. •• Push [J] or [K] several times to select a desired message. •• Selectable messages may differ, depending on the Controller setting. •• When Area Call is selected, push [J] or [K] to select ON. 4. Push [PTT] to make a call. 5. Hold down [PTT], and speak at your normal voice level. 6. Release [PTT] to listen. 7. Repeat the steps 5 and 6 until you finish your conversation. 8. To hang up a telephone call, push [Option]. •• The function assigned to [Option] may differ, depending on the Controller setting. (p. 5-2) •• Ask your system manager which function is assigned. NOTE: Use one of the following options for fullduplex operation. •• HM-153LS •• HM-166LS •• HS-85 (Discontinued product) with OPC-2144 •• HM-153 with OPC-2144 •• HM-166 with OPC-2144 •• HS-102 with OPC-2359 4-2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
4
CALLING OPERATION
4-2
Calling procedures outline
1.
Select an address book. (p. 4-3)
•
Push [
] several times.
•
Select “All” for all terminals calls, “Group” for
group calls, “Talkgroup” for talkgroup calls,
“Individual” for individual terminal calls, or
“Telephone” for telephone calls.
•
Selectable address books may differ, depending
on the Controller setting.
•
You may select “Talkgroup” by pushing [FUNC],
depending on the Controller setting. (p. 4-12)
2.
Select an address (ID) or extension number.
(p. 4-3)
•
Push [
J
] or [
K
] several times.
•
Selectable IDs or extension numbers may differ,
depending on the Controller setting.
•
You can select a desired ID or extension
number from the call history by pushing [
].
(p. 4-7)
Selectable logs may differ, depending on the
Controller setting.
3.
If you want to send a message (p. 4-6), or make
an area call (p. 4-9), push [FUNC] several times.
•
Select “Message” to transmit a message, or
“Area Call” for an Area Call.
•
Push [
J
] or [
K
] several times to select a
desired message.
•
Selectable messages may differ, depending on
the Controller setting.
•
When Area Call is selected, push [
J
] or [
K
] to
select ON.
4.
Push [PTT] to make a call.
5.
Hold down [PTT], and speak at your normal voice
level.
6. Release [PTT] to listen.
7.
Repeat the steps 5 and 6 until you finish your
conversation.
8.
To hang up a telephone call, push [Option].
•
The function assigned to [Option] may differ,
depending on the Controller setting. (p. 5-2)
•
Ask your system manager which function is
assigned.
[PTT]
[Option]
Information:
When the VOX function or full-duplex mode is set in
the Controller, steps 5 and 6 are unnecessary.
When the VOX function is set, speak into the
headset microphone to transmit, then stop speaking
to listen.
In full-duplex, you can speak and hear the other
person at the same times.
NOTE:
Use one of the following options for full-
duplex operation.
• HM-153LS
• HM-166LS
•
HS-85 (Discontinued product) with OPC-2144
•
HM-153 with OPC-2144
•
HM-166 with OPC-2144
•
HS-102 with OPC-2359