Icom IP100H Instruction Manual ver.2.20 - Page 21
Voice communication, Individual call, All call, Group (or Talkgroup) call, Telephone call
![]() |
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4 CALLING OPERATION Voice communication [PTT] [Option] Information: Only one terminal can reply to an All, Group call. We recommend you to carefully listen for a reply after you making an All or Group call. When the VOX function or full-duplex mode is set at the Controller, the [PTT] toggling between transmit and listen is not necessary. When the VOX function is set, speak into the headset microphone to transmit, stop speaking to listen. In full-duplex, you can speak and hear the other person at the same times. NOTE: Use one of the following options for fullduplex operation. •• HM-153LS •• HM-166LS •• HS-85 (Discontinued product) with OPC-2144 •• HM-153 with OPC-2144 •• HM-166 with OPC-2144 •• HS-102 with OPC-2359 DDIndividual call 1. Push [ ] several times to select "Individual." 2. Push [J] or [K] several times to select a desired individual address (ID). 3. Push [PTT] to call. •• When your call is successful, "Connected" may be displayed and beeps may sound, depending on your system Controller setting. 4. Hold down [PTT] and then speak at your normal voice level. 5. Release [PTT] to listen. 6. Repeat the steps 4 and 5 until you finish your conversation. DDAll call 1. Push [ ] several times to select "All." 2. Push [PTT] to call. 3. Hold down [PTT] and say your message at your normal voice level. 4. Release [PTT] to listen. DDGroup (or Talkgroup) call 1. Push [ ] several times to select "Group" or "Talkgroup*." * Only when the Talkgroup is assigned to [ ] key. Refer to the Section 4 for details on the talkgroup function. (p. 4-10) 2. Push [J] or [K] several times to select a desired group address (ID) or a talkgroup address (ID). 3. Push [PTT] to call. 4. Hold down [PTT] and say your message at your normal voice level. 5. Release [PTT] to listen. DDTelephone call 1. Push [ ] several times to select "Telephone." 2. Push [J] or [K] several times to select a desired extension number (ID). 3. Push [PTT] to call. 4. Wait until reply is heard. 5. After the reply, hold down [PTT] and then speak at your normal voice level. 6. Release [PTT] to listen. 7. Repeat the steps 5 and 6 until you finish your conversation. 8. To hang up the call, push [Option]. 4-5
![](/manual_guide/products/icom-ip100h-instruction-manual-ver220-babf66b/21.png)