Icom M36 Instruction Manual - Page 17

BASIC OPERATION 4 ■ Call channel programming Call channel is used to access Channel 9 (default), however, you can program the call channel with your most often-used channels in each channel group for quick recall. q Push and hold [CH/WX U/I/C] for 1 sec. several times to select the desired channel group (U.S.A., International or Canada) to be programmed. (p. 9) w P ush and hold [16 9] for 1 sec. to select the call channel of the selected channel group. • "CALL" and call channel number appear. e P ush and hold [16 9] again for 3 sec. (until a long beep changes to 2 short beeps) to enter the call channel programming mode. • Channel number starts blinking. r P ush [Y]/[Z] to select the desired channel. t P ush [16 9] to program the displayed channel as the call channel. • The channel number stops blinking. ■ Adjusting the volume level 1 The volume level can be adjusted with [VOL/SQL MONI] 2 and [Y]/[Z]. 3 q P ush [VOL/SQL MONI] once to enter the volume adjust- 4 ment mode, then adjust the volume level with [Y]/[Z]. 5 • "VOL" indicator starts blinking. • The transceiver has 31 volume levels and OFF. 6 • With no key operation is performed for 5 sec., the transceiver returns to the normal condition. 7 w P ush [VOL/SQL MONI] twice to exit the volume adjust- 8 ment mode. 9 10 Indicates the 11 volume level. 12 Blinks while adjusting the volume level. 13 14 15 16 11