Icom M36 Instruction Manual - Page 25
Auto scan function, Dual/Tri-watch function, Monitor key action, Automatic backlighting
View all Icom M36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
SET MODE 7 D Auto scan function "AS" The auto scan function starts normal or priority scan auto- matically when no signal is received, and no operation is performed for 30 sec. Push Auto scan OFF (default) Auto scan ON D Dual/Tri-watch function "dt" This item can be set as Dualwatch or Tri-watch. (p. 16) Push Dualwatch function (default) Tri-watch function D Monitor key action "Sq" The monitor key opens the squelch temporarily. This item sets the key action. • Pu (PUSH) : The monitor function is activated by pushing and holding [VOL/SQL MONI] for 1 sec. The squelch opens while holding down the key. • Ho (HOLD) : The monitor function is activated by pushing and holding [VOL/SQL MONI] for 1 sec. The squelch stays open until any key is pushed. 1 Push 2 3 Push setting (default) Hold setting 4 D Automatic backlighting "bL" 5 This function is convenient for night-time operation. The backlight can be selected from ON and OFF. 6 • The backlight is automatically activated when any key except for 7 [PTT] is pushed. • The backlight is automatically turned OFF after 5 sec. of inactivity. 8 9 10 Push 11 Auto backlighting ON (default) Auto backlighting OFF 12 13 D LCD contrast setting "LC" 14 Set the LCD contrast level from High contrast and Low con- trast. 15 The LCD contrast level makes no difference for indoor use. 16 High contrast (default) Push Low contrast 19