Icom M73 Instruction Manual - Page 22
Scan Operation
![]() |
View all Icom M73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
5 SCAN OPERATION (Except for the Dutch version) ■ Scan types Scanning is an efficient way to quickly locate signals over a wide frequency range. The transceiver has a priority scan setting and normal scan setting. In addition, the "Weather alert*" and "Auto scan" functions are also selectable for scanning. These functions can be simultaneously activated, depending on the settings in the SET mode. (pp. 26, 27) * For only the USA, EXP, and AUS versions. NORMAL SCAN CH 01 CH 02 Set the Favorite channels (scanned channel) before scanning. Clear those Favorite channels which are not needed or inconveniently stop scanning, such as digital communications. Choose priority or normal scan in the SET mode. (p. 26) PRIORITY SCAN CH 01 CH 02 WX* CH 03 WX* CH 16 CH 03 CH 05 CH 04 * Previously selected weather channel when weather alert function is ON. Normal scan, like priority scan, sequentially searches through all Favorite channels. However, unlike priority scan, Channel 16 is not checked unless it is set as a Favorite channel. 14 CH 05 CH 04 * Previously selected weather channel when weather alert function is ON Priority scan sequentially searches through all Favorite channels while monitoring Channel 16. When a signal is detected on Channel 16, the scan pauses until the signal disappears; when a signal is detected on a channel other than Channel 16, scan becomes Dualwatch until the signal disappears.
![](/manual_guide/products/icom-icm73-instruction-manual-e3d8f11/22.png)