Icom M73 Instruction Manual - Page 36

8 SET MODE DDLCD contrast selection " " The contrast of the LCD can be set to Hi (default) or Lo. Push High contrast (default) Low contrast DDAuto power save function " " The auto power save function reduces current drain by de- activating the receiver circuit for preset intervals. • ON : T he power save function is turned ON. The power save function will activate when no signal is received, and no operation is performed for 5 seconds • OFF : The power save function is turned OFF. Power save ON (default) Push Power save OFF DDChannel name scroll type " " Set the channel name/comment scroll type to 1 or 2. • 1: The first 7 characters are displayed for approximately 1 sec- ond then scrolls. When the channel name or comment is 7 character or less, it does not scroll (default). • 2: The channel name or comment scrolls regardless of the num- ber of characters after no name or comment (blank) is dis- played for 1 second. Push Scroll type 1 (default) Scroll type 2 DDScrolling speed " " Selects the channel name/comment scroll speed. • 1: Scrolls 3.33 characters in a second. • 2: Scrolls 2.5 characters in a second. • 3: Scrolls 2 characters in a second. Push Scroll speed 2 (default) Scroll speed 3 28