Icom M73 Instruction Manual - Page 42
Optional battery chargers
View all Icom M73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
9 BATTERY CHARGING ■ Optional battery chargers DDAD-129 installation qqConnect the 8-pin connector of the each charger slot to the AD-129 desktop charger adapter's plug. wwInstall the adapter into the each charger slot in the direction of the arrow, then use the two supplied screws to secure the adapter to the charger. Desktop charger adapter 8-pin connector Supplied screws DDRapid charging with the BC-197+BC-157S or OPC-656 The optional BC-197 with the BC-157S will simultaneously charge up to 6 Li-ion battery packs. The following items are additionally required. (Charging time: approximately 2.5 hours) • Six AD-129 charger adapters • An AC adapter (BC-157S) or the DC power cable (OPC-656) Battery pack Transceiver Turn OFF power NEVER transmit near the BC-197 or the AC adapter while charging. The charger adapters are installed in each slot. AC adapter (An AC adapter is not supplied with some versions.) Status indicator (each indicator independently functions) OPC-656* *DC power cable (OPC-656) DC power cable (Connect to a DC power supply: 12 to 16 V/at least 7 A) NEVER reverse the polarity when connecting the power cable to a power source. This will ruin the battery charger. Red line : + Black line : _ 34