Icom MA-500TR Instruction Manual - Page 18

3 PREPARATION ■ Initial setting mode (Continued) D Internal/External GPS Antenna Position Set these measurements to indicate the internal and/or external GPS antenna position on the vessel. • Internal GPS antenna : T he GPS antenna which is connected to the [GPS] connector. • External GPS antenna : T he GPS antenna which is connected to one of the NMEA lines. (p. 37) q P ush [∫] or [√] to select "A," "B," "C" or "D." • A : Bow to Antenna • B : Stern to Antenna • C : Port side to Antenna • D : Starboard side to Antenna • Push [CLEAR] to cancel and return to the previous screen. w P ush [Ω] or [≈] to input the value into that item. A and B : Between 0 and 511 meters (0 and 1676.5 feet) C and D : Between 0 and 63 meters (0 and 206.6 feet) e R epeat steps q and w to input other values. r P ush [ENT] to save and return to the Initial setting mode. [ENT] [CLEAR] This screen shows the internal GPS antenna set screen. To show the external GPS antenna set screen, select "Set 10 EXT GPS POS" in the "Initial Setting" mode. (p. 9) D Type of Ship Select your vessel type. ➥ Push [∫] or [√] to select your vessel type from the list, then push [ENT] to save and return to the Initial setting mode. [∫] [ENT] [√] • Type of Ship List 30 Fishing 31 Towing 32 Towing & two < 200m 33 Engaged in Dredging 34 Engaged in Diving 35 Engaged in Military 36 Sailing 37 Pleasure Craft 50 Pilot 51 Search & Rescue Vessel 52 Tugs 53 Port tender 54 Vessels with anti pollution 55 Law enforcements Vessel 58 Medical Transports 59 Ships RR Resolution NO18 60 Passenger Ship 70 Cargo Ship 80 Tanker