Icom MA-500TR Instruction Manual - Page 24
Target list display operation
View all Icom MA-500TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4 BASIC OPERATION ■ Plotter display operation (Continued) D Setting the display type (North up/COG up) Select the display type between "North up" and "COG up." q Push [MENU] to enter the Menu mode. w P ush [∫] or [√] to select "North up/COG up," then push [ENT]. e P ush [ENT] to select either "North up" or "COG up." • Y ou can also select the option by pushing [Ω] or [≈]. North up : The top of the plotter display represents North. COG up : The top of the plotter display represents the di- rection your course is heading. r P ush [CLEAR] to save and return to the Menu mode. t P ush [CLEAR] to exit the Menu mode. ENT] [CLEAR] [MENU] ■ Target list display operation The target list display shows all AIS targets being detected by the transponder, including their range and bearing information. The AIS target data is sorted by the distance from your vessel, and the closest target is located on the top of the list. Their range and bearing information is automatically updated every 5 seconds, then the AIS target data is sorted. q Push [DISP MODE] several times to select the target list display. w P ush [∫] or [√] to select the desired AIS target. e P ush [ENT] to display it's detail screen. (p. 17) NOTE: The alarm buzzer sounds when a malfunction occurs or an AIS target is closer than your CPA and TCPA settings, depending on the presetting. (pp. 29, 30, 33, 44) ➥ To stop the alarm buzzer, push [CLEAR]. • If the popup screen is displayed, push [CLEAR] again to turn it OFF. 16