Image Fitness 12.2i Treadmill English Manual - Page 14
fitness program
View all Image Fitness 12.2i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
HOW TO USE THE FITNESS PROGRAM 4 Put on the heart rate monitor. The fitness program is designed to measure the relative fitness level you have achieved. For the best results, the fitness program should be used at a time when your energy level is high; the fitness program should not be used if you have already exercised during the day. The fitness program consists of seven 4-minute periods, and is followed by a 2-minute cool-down period. The speed and/or incline of the treadmill will automatically increase at the beginning of each 4-minute period. To use the fitness program, follow the steps below. Insert the key into the console. II See HOW TO TURN ON THE POWER on page 9. Select the fitness program. To select the fitness program, press the FITNESS PROGRAM button. The letters CALL / FAT CALS. / PULSE 2v, 11-- In- "FP" will appear in the CALS./FAT CALS./ PULSE display and the letters "AGE" will DISTANCE 1-1 1- 1/ 0 1: flash in the DISTANCE display. Note: If the walking belt is moving when the FITNESS PROGRAM button is pressed, the walking belt will slow to a stop. In addition, if the incline of the treadmill is higher than 1%, it will automatically decrease to 1%. Enter your age into the console. You must enter your age to use the fitness program. Press either of the DISTANCE -1 1-1 .7.1 1_1 SET AGE buttons. The current age setting will appear in the DISTANCE display. To enter your age, press the SET AGE buttons again. Each time one of the buttons is pressed, the age setting wilt change by 1 year. If one of the buttons is held down, the age setting will change in increments of 5 years. Once your age is entered, it will be saved in the console's memory. Note: If you have already entered your age, you must press one of the SET AGE buttons to verify the age setting before the fitness program can be started. The heart rate monitor must be worn when the fitness program is used. To put on the heart rate monitor, see HOW TO USE THE HEART RATE MONITOR on page 6. Note: The fitness program can be started without your heart rate being detected; however, the program will automatically stop if your heart rate is not detected 4 minutes after the program is started. Press the START button. When the START button is pressed, the TIME display will begin counting up and the DISTANCE DISTANCE display will show an "L 1" (level 1), indicating that the first I 4-minute period of the fitness program has begun. The incline of the treadmill will automati- cally adjust to 2.0% and the walking belt will begin to move at 1.5 mph. Hold the handrails and step onto the walking belt. When the first 4-minute period of the fitness program is completed, the DISTANCE display will show an "L 2," indicating that the second 4-minute period has begun. The incline and speed of the treadmill will then increase. When the second 4-minute period is completed, the DISTANCE display will show an "L 3? The incline will remain the same, but the speed will then increase. At the beginning of each 4-minute period, the speed and/or incline of the treadmill will automatically increase. The fitness program will continue in this manner until your heart rate reaches 70% of your theoretical maximum heart rate, and the current 4-minute period is completed. The fitness program will then be completed, regardless of how many periods remain. When the fitness program is completed, the letter "C" will appear in the DISTANCE display, indicating that the cool-down period has begun. The TIME DISTANCE LI- display will count down from 2 minutes. 14