Image Fitness 19.0 R Treadmill English Manual - Page 8

5. While a second person holds the console assembly near the Handrail (20) as shown, attach the ground wire to the 5 indicated hole in the Handrail with a Silver Ground Screw (94). Ground Wire 94 Hole 20 Console Assembly 6. While a second person continues to hold the console assembly, look underneath it and locate the Console Wire 6 Harness (78). Connect the Console Wire Harness (78) to the Upright Wire Harness (77). Make sure to connect the connectors properly (see the inset drawing). The connectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and then try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Then, insert the Wire Harnesses down into the Handrail (20). 78 Console Assembly 77 78 77 20 7. Set the console assembly on the Handrail (20). Be careful to avoid pinching any of the wires. Hand tighten 7 five Screws (3) into the Handrail and the console assem- 20 bly. Do not put Screws into the two indicated holes. Start all five Screws, but do not tighten them yet. Console Assembly 3 3 3 No Screws 8