Image Fitness Renew 455 Spa Canadian English Manual - Page 17

To Run After It Has Been Shut Off

Page 17 highlights

10. SYMPTOM: THE SPA JET UNIT CONTINUES TO RUN AFTER IT HAS BEEN SHUT OFF a. To turn the spa jets on low, press the jet button once. To turn the spa jets on high, press the jet button twice. To turn the spa jets off, press the button three times. The spa jets will remain off for two hours, at which time they will begin running the filter cycle. At any time after the spa jets have been shut off, the pump will begin cycling the water if the temperature falls below the minimum setting. Note: If the water temperature is already below the minimum setting, the pump will not shut off. 11. SYMPTOM: NO AIR FLOWS THROUGH THE ADJUSTABLE HYDROTHERAPY JETS WHEN THE AIR CONTROL IS TURNED COUNTERCLOCKWISE a. The three adjustable hydrotherapy jets can be closed and opened by pushing and pulling the nozzles. If no air flows through the hydrotherapy jets when the air control is turned counterclockwise, simply pull the nozzles slightly. 12. SYMPTOM: THE CONSOLE DISPLAYS THE WORDS "COOL" OR "ICE" a. This is a normal function of the spa; no action is necessary. The word "COOL" will appear in the display if the temperature of the water is more than 20°F (10°C) cooler than the set temperature. If this happens, the heater will automatically activate to warm the water. The word "ICE" will appear if the temperature drops below 40°F (4°C). If this happens, the pump will automatically circulate the water and warm the plumbing. 13. SYMPTOM: THE CONSOLE DISPLAYS ONE OF THE FOLLOWING MESSAGES: "OH," "5n1," "5n3," "FLO," "Pd," "O3," "PH50," "PH90," or "ILOC" a. If the console displays one of the messages listed above, or if the console does not function properly, contact our customer service department. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

17
10. SYMPTOM: THE SPA JET UNIT CONTINUES
TO RUN AFTER IT HAS BEEN SHUT OFF
a. To turn the spa jets on low, press the jet button
once. To turn the spa jets on high, press the jet
button twice. To turn the spa jets off, press the
button three times. The spa jets will remain off
for two hours, at which time they will begin run-
ning the filter cycle. At any time after the spa
jets have been shut off, the pump will begin
cycling the water if the temperature falls below
the minimum setting.
Note: If the water tem-
perature is already below the minimum set-
ting, the pump will not shut off.
11. SYMPTOM: NO AIR FLOWS THROUGH THE
ADJUSTABLE HYDROTHERAPY JETS WHEN
THE AIR CONTROL IS TURNED COUNTER-
CLOCKWISE
a. The three adjustable hydrotherapy jets can be
closed and opened by pushing and pulling the
nozzles. If no air flows through the hydrotherapy
jets when the air control is turned counterclock-
wise, simply pull the nozzles slightly.
12. SYMPTOM: THE CONSOLE DISPLAYS THE
WORDS “COOL” OR “ICE”
a. This is a normal function of the spa; no action
is necessary. The word “COOL” will appear in
the display if the temperature of the water is
more than 20°F (10°C) cooler than the set tem-
perature. If this happens, the heater will auto-
matically activate to warm the water. The word
“ICE” will appear if the temperature drops
below 40°F (4°C). If this happens, the pump
will automatically circulate the water and warm
the plumbing.
13. SYMPTOM: THE CONSOLE DISPLAYS ONE OF
THE FOLLOWING MESSAGES: “OH,” “5n1,”
“5n3,” “FLO,” “Pd,” “O3,” “PH50,” “PH90,” or
“ILOC”
a. If the console displays one of the messages
listed above, or if the console does not function
properly, contact our customer service depart-
ment.