InSinkErator Model Hot1 Owners Manual - Page 5

START HERE 1 PREPARATION A Required minimum from center of hole to wall 33⁄4" Maximum counter thickness (depth) 2" I Identify location for the dispenser. I Check to make sure there is proper clearance for dispenser handle to be fully opened. I Check to make sure counter is not too thick. I Make sure there is a grounded electrical outlet under the sink. The wall outlet for your dispenser must have power supplied to it continuously and must be fused. It should not be controlled by the same wall switch that operates your disposer. B If you have to drill through sink or countertop, you may need to rent or purchase the appropriate tools. I Turn off water supply. I If using the sink sprayer hose hole, remove nut that connects sprayer hose at bottom of faucet. I Using adjustable wrench, remove nut connecting sprayer washer flange in sprayer hole. I Plug hose opening with either a 1/8" plug or a 1/4" cap (not supplied). C Required Hole Diameter 13⁄8" Consult a professional before drilling into a surface other than stainless steel. What if you don't have a sprayer hole or don't want to use it? I Many homeowners replace the soap dispenser in their sink with an instant hot water dispenser. I If drilling a hole into a stainless steel sink or counter top, you can cut a mounting hole for the dispenser with a hole saw for stainless steel, or you can use a hole punch. 5