Insignia IDM-FD10 User Manual (English) - Page 13
Speaker Size setting, Channel Level setting, Delay Time setting, ENTER, Speaker Size, Channel Level
View all Insignia IDM-FD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Insignia NS-BRDVD Blu-ray Disc Player 6 Press or to select a speaker setting, then press ENTER. You can select: • Speaker Size-See "Speaker Size setting" on page 11. • Channel Level-See "Channel Level setting" on page 11. • Delay Time-See "Delay Time setting" on page 11. 7 Press or to select a sub-setting. 8 Press or to adjust the sub-setting. Note • • • • If you select Test Tone in the Channel Level setting, press or to select Off, Manual, or Auto, then press ENTER. If you select Manual, press or to select a speaker, then press or to adjust the volume. If you select Auto, press or to adjust the volume of the speaker that automatically outputs a test tone. If you select Default on any setting, press ENTER. All sub-settings for the setting you selected are reset to the default settings. 9 Press SETUP to close the menu. Notes • All speaker sizes must be the same. For example, is you set the front speaker to Small, you cannot set another speaker to Large. • In the Delay Time setting, the distance between speakers cannot exceed 15 ft. (4.5 m). Speaker Size setting The Speaker Size setting specifies the size individual speakers. Setting Options Front Large Small Center Large Small Subwoofer On Surround Large Small Surround Large back Small Default Description Large: For large speakers with strong low frequency reproduction capabilities. Small: For small speakers which do not provide strong bass sound. You cannot change the Subwoofer setting. If the connected device is not compatible with a subwoofer, Subwoofer will be displayed in gray. Select Default, then press ENTER to reset the Speaker Size setting to the default. Channel Level setting The Channel Level setting tests each speaker or sets the volume for each speaker. Setting Option Description Test Tone Off Manual Auto The test tone can be output from the speakers so that you can adjust the volume for each speaker. Select Off to deactivate the test tone. Select Manual, then press ENTER to manually set the volume for the each speaker. Select Auto, then press ENTER to automatically output the test tone from each speaker. Front Lch Center Subwoofer Front Rch 0 dB to - 12 dB (0 dB default) 0 dB to - 12 dB (0 dB default) 0 dB to -12 dB (0 dB default) 0 dB to -12 dB (0 dB default) If you set Test Tone to Manual, select a speaker and adjust the volume. If you set Test Tone to Auto, a test tone is automatically output to each speaker in order. Adjust the volume for the speaker that outputs the test tone. Surround 0 dB to -12 dB Rch (0 dB default) Surround 0 dB to -12 dB Back Rch (0 dB default) Surround 0 dB to -12 dB Back Lch (0 dB default) Surround 0 dB to -12 dB Lch (0 dB default) Default Select Default, then press ENTER to reset the Channel Level settings to the defaults. Delay Time setting The Delay Time setting optimizes the timing at which the sounds are output from the speakers according to their distance from the listening position. Setting Distance Front Center Surround Surround Back Default Option Description Feet Meters Select the distance measurement, then press ENTER. 0 ft. to 60 ft. Select the distance between the (0 m to 18 m) speaker and the listening position. Default is 12 ft. (3.6m) 0 ft. to 60 ft. (0 m to 18 m) Default is 12 ft. (3.6m) 0 ft. to 60 ft. (0 m to 18 m) Default is 10 ft. (3.0m) 0 ft. to 60 ft. (0 m to 18 m) Default is 10 ft. (3.0m) Select Default, the press ENTER. www.insignia-products.com 11