Insignia IS-TV040924 User Manual (English) - Page 8
Setting Language
View all Insignia IS-TV040924 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
SETTING LANGUAGE This TV can display the on-screen language in English, Spanish or French. On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. 1 Press the MENU button. 2 Press the CH or button to select the "LANGUAGE" mode, then press the ENTER MENU CH SETUP PICTURE AUDIO LANGUAGE/IDIOMA/LANGUE V-CHIP SET / /ENTER/MENU/EXIT 3 Press the CH or button to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button. / /ENTER/MENU/EXIT button. NOTE: 4 Press the EXIT button until the menu screen is cleared. If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text will not be affected by the language selection. TV OPERATION 1 To turn on the TV, press the POWER button. 2 The VOLUME can be adjusted to a desired level by pressing the VOL or button. Direct Channel Selection buttons (0-9) Press these buttons to select a channel. The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the original channel. The sound level will be indicated on the TV screen by green bars and a number. As the sound level increases, so do the number of bars and the number on the screen. The same is true for decreasing the level. 3 Set the TV/CATV menu option to the appropriate position. When shipped from the factory, this menu option is in the CABLE TV setting. See "TO MEMORIZE CHANNELS". TV - VHF/UHF channels CATV - CABLE TV channels 4 CH and buttons Press and release the CH or button. The channel automatically stops at the next channel set into memory. Press and hold the button down to change channels more quickly. For proper operation, before selecting channels, they should be set into the TV's memory. See "TO MEMORIZE CHANNELS". TV Mode Direct Channel Selection When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two buttons. (For example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few seconds). For channels 10 and above, press the 2 digits in order. CATV Mode Direct Channel Selection When the TV/CATV menu option is in the CATV position, channels can be selected as follows: CH. 1-9 CH. 10-12 CH. 13-99 CH. 100-125 Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002". Press "0", then remaining 2 digits. Example, to select channel 12, press "012". Press the 2 digits in order. Example, to select channel 36, press "36". Press the 3 digits in order. Example, to select channel 120, press "120". NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes. 8 3U20431A [E] P02-08 8 2/21/05, 6:26 PM