Insignia NS-19E320A13 User Manual (English) - Page 15

Insignia 19"/22" LED TV Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an A/V cable (not provided) to the AV IN VIDEO jack and L/R AUDIO jacks on the side of your TV and to the composite video and audio out jacks on the cable or satellite box. Note • The AV IN VIDEO jack shares the audio jacks with the COMPONENT IN video jacks. • When you connect the audio using the L/R AUDIO jacks, the audio output is analog. Cables are often color-coded to match color-coded jacks. Note: The yellow video connector on the AV cable connects to the green AV IN VIDEO jack. Side of TV Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out jack on the cable or satellite box. Back of TV D I G I TA L OUTPUT / (COAXIAL) AUDIO OUT VGA PC/DVI AUDIO PC IN ANT/ CABLE IN US B PR C OMPONE NT IN Cable or satellite box A/V cable 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 20. HDMI 1 (DVI) AV IN HDMI 2 (AR C ) L AUDIO R VIDE O/Y PB Cable or satellite box Coaxial cable 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 20. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. www.insigniaproducts.com 11