Insignia NS-32D310NA15 User Manual (English) - Page 20
Component video better
View all Insignia NS-32D310NA15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
NS-32D310NA15 Insignia 32" LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. Cable or satellite box On your TV Component Audio cable video cable connectors connectors Component Analog video jacks audio jacks Back of TV Audio cable Component video cable 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a component video cable (not provided) to the Y/VIDEO, PB, and PR jacks on the back of your TV and the component video out jacks on the cable or satellite box. 4 Connect an audio cable (not provided) to the L and R AUDIO jacks on the back of your TV and to the audio out jacks on the cable or satellite TV box. Notes • The Y/VIDEO, PB, and PR video jacks (used to connect a component device) share the L and R AUDIO jacks with the Y/VIDEO jack (used to connect an AV (composite video) device). • When you connect the audio using the L and R AUDIO jacks, the audio output is analog. 5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Press INPUT to open the INPUT SOURCE list. 7 Press S or T to highlight Component/AV, then press ENTER. www.insigniaproducts.com 15