Insignia NS-A1112 User Manual (English) - Page 6
Using the clock, Adjusting the sound, Using the radio, Using the CD - manual
View all Insignia NS-A1112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Insignia NS-A1112 Executive Shelf System with Tuner Using the clock When the stereo is turned off, the real-time clock shows in the LCD display. To adjust the time: 1 Press Mode once to enter the clock setting mode. The time flashes in the LCD display. 2 Press Skip Backward/Tuning - once to decrease the hour. 3 Press Skip Forward/Tuning + once to increase the hour. 4 Press Volume - once to decrease the minute. 5 Press Volume + once to increase the minute. 6 Press and hold any of these buttons for more than 1 second to enter the fast setting mode. After the time is changed, the seconds reset to "00" and the clock stops running. 7 To confirm the time and exit clock setting mode, press Mode. The clock starts. Note: If there is no button operation for 10 seconds, the stereo automatically exits the clock setting mode. Adjusting the sound Volume To adjust the volume: 1 Press Volume + as necessary to increase the volume. 2 Press Volume - as necessary to decrease the volume. Preset equalizer The preset equalizer provides five ranges of control (NORMAL, ROCK, JAZZ, POP, AND CLASSIC) for the audio frequency spectrum in narrow and distinct sections. Press EQ to select the best response that suits your type of music and individual taste. Using the radio After pressing a button while using the radio, the LCD display shows the operation. Five seconds after any operation is completed, the LCD will re-display the clock. Tuner mode 1 Press Tuner/Band once to turn on the stereo and restore the band and frequency playing when the stereo was turned off. 2 In Tuner mode, Press Tuner/Band to toggle between AM and FM bands. 3 With the radio set to FM band, press Mode to toggle between FM stereo or mono mode. If the FM stereo mode is selected, the Stereo indicator on the LCD will be lit. AUX IN mode 1 Press Aux to select the auxiliary mode. The RCA jacks at the back of the stereo can be used for connecting external audio sources. 2 Make sure the correct color of the RCA plug is paired with the correct color of RCA jack. Reception To adjust FM reception: • Raise and extend the FM antenna, then adjust the position for the best reception. The Stereo indicator appears on the LCD only if an actual stereo broadcast station is being received. To adjust AM reception: • Because the built-in ferrite bar antenna is directional, rotate the stereo horizontally or relocate the stereo for best reception. Tuning To tune the stereo manually: 1 In Tuner mode, press Skip Forward/Tuning + to move to a higher radio frequency one frequency step at a time. 2 In Tuner mode, press Skip Backward/ Tuning - to move to a lower radio frequency one frequency step at a time. To tune the stereo automatically: 1 Press and hold Skip Forward/Tuning + or Skip Backward/Tuning - to auto search in the desired direction at the speed of four frequency steps per second. 2 Hold the button down to bypass all stations until the button is released. After the button is released, the radio stops at the next station frequency. When the tuning reaches the band edge, the tuner will wrap around to the opposite end and keep searching. 3 While auto-tuning, no other functions are available. To use another function while auto-tuning, press Standby/On, Play/Pause, or Aux to abort the auto tuning. You then can perform another function. Channel save and recall You can program (save) 20 preset FM stations and 12 preset AM stations. To save station settings: 1 In Tuner mode, select the station to be saved, then press Memory/Program once to enter the Channel Save mode. 2 Press Memory/Program again to save the channel in memory, then press Preset + / - to confirm the operation. 3 Repeat Steps 1 and 2 to enter more stations (up to 20 FM stations and 12 AM stations.) 4 Press any other button to abort or exit the channel save operation. To find saved stations: 1 Press Preset + / - to find a saved channel. 2 Press Preset + / - again to move to the next saved channel. Repeat the process as necessary to reach the channel you want. Using the CD This executive shelf system can play audio discs such as CD-R or CD-RW discs. Do not try to play a CD-ROM, CDi, VCD, DVD, or computer data CD. 6 www.insignia-products.com