Insignia NS-A1112 User Manual (English) - Page 7
Maintaining the executive, shelf system - cd player
View all Insignia NS-A1112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Insignia NS-A1112 Executive Shelf System with Tuner Use a CD with the logo at left in this stereo. The executive shelf system can play 3" (8 cm) single CDs without an adapter (not included). Do not use a CD single adapter for these CDs. Note Always store discs in their cases. Do not expose discs to direct sunlight, high temperature, high humidity, or dust. When removing the disc from its case, • Do not touch the recorded surface opposite the side of the CD with the label • Do not stick paper on label surface • Do not bend the CD. Operating the CD player When using the CD player, after pressing a button the LCD display will show the operation. Five seconds after any operation is completed, the LCD will re-display the clock. Basic CD play 1 Press Push Open to open the CD compartment lid. 2 Adjust the Volume +/- to minimum. 3 Remove the CD from its storage case, then insert the CD with the label side facing up. 4 Close the lid securely until you hear a click. 5 Press Play/Pause to start playing. Play/Pause function This CD player has no ON/OFF switch. To turn the player on and off: 1 In power off mode, press Standby/On or Play/Pause once to turn on the executive shelf system in CD mode. The executive shelf system will start playback automatically. 2 Turn off the CD player by pressing the Stop button. 3 While in CD mode: • Open and close the CD door to start playback automatically. • When the CD stops, press Play/Pause once to start the CD playback. • When the CD is playing, press Play/ Pause once to pause the CD playback. Play mode 1 In CD mode, press Mode to select play mode using the following sequence: NORMAL → REPEAT 1 → REPEAT ALL → RANDOM → REPEAT ALL RANDOM → • Activating REPEAT 1 causes the REPEAT icon to flash. • Activating REPEAT ALL turns on the REPEAT icon. • Activating RANDOM turns on the RANDOM icon. • Activating REPEAT ALL RANDOM turns on the RANDOM and REPEAT icons. 2 To clear the play mode, press Stop or change to mode to Tuner. 3 If Program mode is activated, random mode will not be activated. Program mode Program mode allows you to play up to 20 tracks in the order you choose. To use the program mode: 1 In CD Stop mode, press Memory/Program once to enter the Program mode. 2 Press Skip Forward/Tuning + or Skip Backward/Tuning - to select the desired track. 3 Press Memory/Program again to save the track in memory. 4 Repeat Steps 2 and 3 to enter more tracks (up to 20 tracks). 5 Press Play/Pause to start the program playback. 6 Press Stop twice or open the CD door to clear program memories. Search/Skip Forward and Backward 1 Press Skip Forward/Tuning + or Skip Backward/Tuning - to skip the track forward (+) or backward (-). 2 Press and hold Skip Forward/Tuning + or Skip Backward/Tuning - to search over more than one track forward (+) or backward (-). 3 Release the button to resume normal playback. Maintaining the executive shelf system Cleaning the player • Wipe with a soft cloth. If the player is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. Cleaning the lens A dirty lens causes sound skipping, and if the lens is very dirty, the CD may not work at all. To clean the lens: 1 Open the CD cover. 2 To remove dust or dry particles, use a camera lens blower/brush to blow on the lens several times. • Wipe the lens lightly with the brush to remove dust. • Blow on the lens one more time to make sure that all particles are gone. 3 If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab starting from the middle and working to the outside edge to remove dirt or marks. www.insignia-products.com 7