Insignia NS-A3111 User Manual (English) - Page 11

Insignia NS-A3111 DVD Executive Shelf System Changing your player's settings Menu SYSTEM SETUP Available options SCREEN SAVER-Turn screen saver On or Off. JPEG TIME-Select the JPEG slide show interval while playing a picture CD. Each picture will display for the duration specified before showing the next one automatically. Choices include 5SEC, 10SEC, and 15SEC. PASSWORD-Many DVD movie discs contain MPAA rating codes. This shelf system recognizes the codes on these DVDs. This provides a method for you to prevent children from viewing films which are not suitable or that you find objectionable. To unlock the RATING feature or change the password, press the numeric buttons to input the existing password (the factory-set password is "1234"), then press ENTER. You can then change the RATING setting as shown below, or input a new password and press ENTER. An open lock icon indicates that parental lock is NOT active. A closed lock icon indicates that parental lock is active. RATING-After entering the password (as shown above), Select the highest rating you want anyone to view, then lock the password. To play a disc with a higher rating, the password must be entered. Ratings include: • KID SAFE-Content is safe for children. • G-Recommended as acceptable for all ages. • PG-Parental Guidance is suggested. • PG-13-Material may not be suitable for children under age 13. • PG-R-Parental guidance recommended - very brief mature language or situations. • R-Restricted - violence, adult language and situations unsuitable for young viewers. • NC-17-Not recommended viewing for children under age 17. • ADULT-Should be viewed only by adults due to graphic sexual material, violence, or language. To set the rating when the password is unlocked: • In the System Setup menu, press or to highlight Rating, then press . • Press or to highlight a rating level for the disc inserted, then press OK. • Press or to highlight Password, then press OK. Use the numeric keys (0-9) to enter a four-digit password. If you make a mistake before pressing OK, press CLEAR and enter your four-digit security code again. DVD discs that are rated above the level you selected will not play unless you enter correct the four-digit password. SOURCE-Select the source files that you want to play between Disc and USB. To access files in a USB device, make sure your USB device is connected to the USB jack on the front panel. Note: This system does not support NTFS format. If the USB flash drive does not work, check the USB flash drive file system and format it with FAT or FAT32. Menu Available options LANG(UAGE) SETUP VIDEO SETUP AUDIO SETUP OSD LANGUAGE-Select the language for the on-screen display (menus). AUDIO LANG-Select the DVD audio language you want. SUBTITLE LANG-Select the DVD subtitle language you want. MENU LANG-Select the DVD menu language you want. TV TYPE-Sets the aspect ratio of the picture. Choices include: • 4:3 PS-Select this when your system is connected to a normal TV. Wide-screen images are shown on the screen, but with some parts cut automatically. • 4:3 LB-Select this when your system is connected to a normal TV. Wide-screen images are shown on the screen, with black bands on the top and bottom • 16:9-Select this when your system is connected to a wide-screen TV. Note: Some discs may not be able to play according to your selection due to the format that has been recorded on the disc. For example, a disc recorded in 4:3 mode can only be played in 4:3. The TV TYPE should correspond to the TV screen. VIDEO-Choose video output that matches the video connection between your system and TV. Choices include: • 480i YPBPR-Select this if you have connected unit to your TV using Y, Cb, Cr video cable. • P-SCAN YPBPR-Select this if you have connected the unit to your TV using the Y, Pb, Pr video jacks and are using the progressive scan feature. Note: You also can press V-SELECT to select this directly. DIGITAL OUTPUT-Select the digital audio format: • SPDIF/RAW-Digital audio output is in the original format, such as AC3 or DTS. • SPDIF/PCM-Digital audio output is converted to PCM. DYNAMIC RANGE- Lets you control the dynamic range so as to achieve a suitable sound for your equipment. • ON-Loud sounds such as explosions are toned down slightly. • OFF-The system plays back at the recording level on the disc. SAMPLING-Selects the decode sampling between 96 KHz and 48 KHz. • 48 KHz-Audio is down sampled at 48 KHz if the disc is recorded in 96 KHz. • 96 KHz-Outputs with original audio format. Note: This function is only available for digital audio output of a disc recorded in 96 KHz. www.insignia-products.com 11