Insignia NS-A3111 User Manual (English) - Page 17
Troubleshooting - manual
UPC - 600603116216
View all Insignia NS-A3111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Insignia NS-A3111 DVD Executive Shelf System To program MP3 songs: 1 Press PLAYMODE. The Play Mode menu opens. PLAY MODE MODE REPEAT PROG OFF 2 With MODE highlighted, press or to select PROG, then press OK to enter the MP3 program menu. In this menu, the letter F means Folder, T means Track. 3 Using two-digit numbers, input the folder number below F and track number below T. 4 Press , , , or to move to another field and repeat Step 3 for the next song. 5 Press or highlight PLAY on the screen, then press OK to start program playback. 6 Highlight CLEAR on the PROG screen, then press OK to delete all inputs. You can program up to 16 songs. Listening to the radio Note Make sure the FM and AM antennas are connected correctly. You can program up to 20 FM and 20 AM radio channels. To search for a radio station: 1 Press STANDBY/ON to turn your shelf system on. 2 Press SOURCE repeatedly until the Radio mode is selected. Press again to switch between AM and FM bands, if necessary. 3 Tune to a radio station by one of the following methods: • Manual Tuning-Press or repeatedly on the remote control until the desired frequency appears on the display. • Automatic Tuning-Press or on the remote control to start the AUTO SCAN function. It stops on any radio station found. Repeat this process until it stops on the station you want. To save a radio station: 1 When you locate a radio station you want to save, press OK to save it. The memory number will start blinking. 2 Press or to select the channel number that you want the unit to memorize. 3 Press OK again to store the channel into the selected memory number. The memory number will stop blinking to confirm that the channel has been saved. 4 Repeat the above steps to save as many as 20 FM and AM radio channels. Note When you tune a weak FM station manually, press AUDIO/FM ST to switch from Stereo mode to Mono mode to reduce background noise. To recall a memorized channel: 1 Press STANDBY/ON to turn your shelf system on. 2 Press SOURCE repeatedly until Radio mode is selected. Press again to switch between AM and FM bands if necessary. 3 Press or on the remote control or or on the front panel to change to a different memorized radio channel. 4 Use the numeric keys (0-9) to directly recall the first 10 memorized channels. Troubleshooting Under no circumstances should you try to repair your shelf system yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. Problem Solution No power • Make sure that the Standby/On button on the front of your shelf system is set to on. • Make sure that the power cord plug is correctly connected. • Make sure that there is power at the AC outlet by plugging in another appliance. No picture • Make sure that the TV is turned on. • Select the correct AV input on the TV. • Check the video connection. • Make sure that the channel selector is set to AV on the TV (See your TV manual for instructions). • When Progressive Scan is on, composite video output is disabled. Press V-SELECT to select the correct video output mode, otherwise, you will have no picture or a distorted picture. Distorted picture • Check the disc for fingerprints and clean with a soft cloth, wiping from the center to the edge. • Sometimes a small amount of picture distortion may appear. This is not a malfunction. • The disc format does not match the TV being used (PAL/NTSC). • Make sure that only one video output is connected. No color in the picture • The disc format is not the same as that of the TV being used (PAL/NTSC). • Make sure that the DVD player is not connected through a VCR. Picture swings Move your shelf system further away from possible interference or emission sources (for example a radio, power amplifier, or radiator). Does not return to start-up screen when a disc is removed • Check to see if the program requires another disc to be loaded. • Reset your system by unplugging the power cord, then connect the power again. The system does not respond to the remote control • Aim the remote control directly at the sensor on the front of the system. • Avoid all obstacles that may interfere with the signal path. • Inspect or replace the batteries in the remote control. www.insignia-products.com 17