Insignia NS-DCC5HB09 User Manual (English) - Page 19

Insignia NS-DCC5HB09 5 MP High Definition Digital Camcorder with 3.0" LCD Monitor Selecting the flash setting for pictures Your camcorder has four flash settings. The flash setting icon appears on the LCD. A Auto-flash-The flash fires automatically depending on the light conditions. Use this mode for general photography. On-The flash fires for every picture. Off-Use this mode when flash photography is prohibited or when the subject is beyond the range of the flash. When you turn off the flash, no flash icon appears on the LCD. Red-eye reduction-The flash fires twice right before you take the picture. Use this mode to help eliminate red reflection in eyes. To select the flash setting for pictures: 1 Press (Record/Play) to switch to record mode. 2 Press OK. The record menu opens. 3 Press or to select Camera Mode. Using the self-timer for pictures When the self-timer is turned on, your camcorder waits 10 seconds after you press (Picture Shutter) before it takes the picture. To use the self-timer for pictures: 1 Press (Record/Play) to switch to record mode. 2 Press OK. The record menu opens. 3 Press or to select Camera Mode. 4 Press T (up) or W (down) to select Selftimer, then press OK. 4 Press T (up) or W (down) to select Flash, then press OK. 5 Press T (up) or W (down) to select a flash option, then press OK to save your selection and close the menu. Note You can also press to change the flash setting. Note The flash is disabled when the battery power is low . 5 Press T (up) or W (down) to select On or Off, then press OK to save your selection and close the menu. Taking a sequence of pictures When the Multi-snap option is turned on, your camcorder takes five pictures in rapid sequence. To take a sequence of pictures: 1 Press (Record/Play) to switch to record mode. 2 Press OK. The record menu opens. 3 Press or to select Camera Mode. www.insigniaproducts.com 17