Insignia NS-DSC1110A Silver User Manual (English) - Page 24

To imprint the date and time on photos: 1 Turn on your camera, then press MODE to switch to Photo mode. 2 Press MENU. The on-screen menu opens. 3 Press / or / to select the (setup) tab. The Setup menu opens. NS-DSC1110A 10 Megapixel Camera 4 Press / or / to highlight Date & Time, then press / or OK/DISP to open the date and time screen. 4 Press / or / to highlight Date Stamp, then press / or OK/DISP to open the submenu. 5 Press / or / to select Off, Date, or Date & Time, then press OK/DISP. 6 Press MENU to close the menu. Setting the date and time Note • The date and time can only be set when Simple mode is set to Off. To set the date and time: 1 Turn on your camera, then press MODE to switch to Photo or Video mode. 2 Press MENU. The on-screen menu opens. 3 Press / or / to select the (setup) tab. The Setup menu opens. 5 Press / or / to set the hour, then press / to move to the minutes field. Tip You can press and hold a navigation button to change the values continuously. 6 Repeat Step 4 to select AM or PM and to enter the year, month, and day. Note If the batteries are removed for longer than 48 hours, the date and time must be reset. 7 Press MENU to close the menu. Turning Power Save on or off Note The power save function can only be accessed when Simple mode is set to Off. The Power Save function automatically turns off your camera after being idle for a specified period of time to save power. This function is turned off when: • Recording and playing a video • Erasing or copying files • Using the USB connector Note Connecting your camera to a computer using the USB connector will not recharge your camera's batteries or enhance battery life. Make sure that you disconnect your camera from the computer and power down your camera when you are finished transferring files to your computer. To turn Power Save on or off: 1 Turn on your camera, then press MODE to switch to Photo or Video mode. 2 Press MENU. The on-screen menu opens. 20 www.insigniaproducts.com