Insignia NS-FLWDPW3 User Guide - Page 8
STEP 4: Installing your pedestal, You need
View all Insignia NS-FLWDPW3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
STEP 4: Installing your pedestal You need: OR 8 mm socket wrench NS-FLWDPW3 WITH 8 mm socket Electric screwdriver Phillips screwdriver 17 mm open end wrench or adjustable wrench 1 Place the pedestal against the bottom of the washer or dryer. Make sure that the drawer opening faces the front of the washer or dryer. Note: For easier alignment of the screw holes, place a packaging side foam under the pedestal. Drawer front opening 8 www.insigniaproducts.com
8
NS-FLWDPW3
www.insigniaproducts.com
STEP 4: Installing your pedestal
You need:
1
Place the pedestal against the bottom of the washer or dryer. Make sure that
the drawer opening faces the front of the washer or dryer.
Note
: For easier alignment of the screw holes, place a packaging side foam
under the pedestal.
8 mm socket wrench
Phillips screwdriver
17 mm open end wrench or
adjustable wrench
OR
WITH
Electric screwdriver
8 mm socket
Drawer front opening