Insignia NS-FWM27W1 User guide - Page 33

OPERATING INSTRUCTIONS NS-FWM27W1 Notes: • After the delay time is set, if you want to change the delay setting, press the Delay button again until the hour you want is reached. Release the button for three seconds. • If you decide to cancel the delay setting, you can either turn the cycle selector or press the Delay button until 0 is reached. • Ideally, you should set your cycle before setting the delay time because turning the cycle selector after you set the delay time cancels the delay function. • You can change settings or cancel the delay start time function anytime before you press the Start/Pause button by turning the cycle selector. • You can't change the delay start time after you press the Start/Pause button. If you pressed the Start/Pause button, you can cancel the delay start time function by pressing the Power button to turn off your washer, then pressing the button again to turn it back on. • You can't change the Delay Start Time after the program has started. Step 7: (Optional) Decrease the wash time • Press the Express button. The Express light turns on and the wash time decreases. Note: Express works for Normal, Perm Press, Heavy Duty, Bulky, and Active Wear cycles. Step 8: Start your washer 1 Press the Start/Pause button. Note: If you haven't set a delayed start time or if the delay time has expired, your washer starts the cycle and the Wash light turns on. As your washer moves from stage to stage in the wash cycle, the related light turns on (such as Rinse or Spin). If you set a delayed start time, the Delay light turns on and your washer starts counting down the start time. 2 If you need to pause the cycle (for example to add or remove items), press and hold the Start/Pause button for three seconds. Wait for the drum to stop, then open the door. When you're ready to resume washing, close the door, then press the button again. CAUTION: Don't try to force the door open if: • The drum is moving. You will damage your washer. • The water level is above the edge of the inner tub. Water will spill on the floor. • The water temperature is too hot. You may burn yourself. • If you press and hold Start/Pause button for three seconds, the door won't open because the door can't match the above conditions. You should wait until the perfect time. www.insigniaproducts.com 33