Insignia NS-HD3113 User Manual (English) - Page 8

Insignia NS-HD3113 HD Radio Shelf System with iPod Dock Connecting to a TV If your TV has component (Y, Pb/Cb, Pr/Cr) connectors, use a component cable (not provided) to make connections. This type of connection provides the best picture. If your TV does not have component connectors, use the A/V composite cable (provided) to make the connections. Connecting to a digital amplifier After making the digital audio connections shown in the following illustration, see "Changing audio settings" on page 12 to set up your shelf system for digital audio output. Video connection TV Video Input Audio R Audio L Y Pb/Cb Pr/Cr Standard audio connection Composite connection AC power Component connection Digital coaxial - ORDigital optical audio connection TV Notes • Before connecting your shelf system to a TV, turn off and unplug both devices. • If your TV has multiple ways to connect to your shelf system, use only one type of connection. Multiple connections can negatively affect picture quality. • Do not use both analog and digital connections at the same time. • Do not turn the shelf system on and off repeatedly. Allow a minimum of 3 seconds in between. To connect an external digital audio device: 1 Make sure that your shelf system is turned off. 2 Connect one end of a digital (optical or coaxial) audio cable (not included) to the appropriate DIGITAL LINE IN jack on the external device, then connect the other end of the cable to either the DIGITAL OPTICAL or DIGITAL COAXIAL LINE OUT jack on your shelf system. 3 Press STANDBY/ON to turn on your shelf system. 4 Open the setup menu and set the audio output to digital (see "Changing audio settings" on page 12). 5 Turn on your digital amplifier and select the correct input from your shelf system. Connecting an iPod® You can control iPod playback just as you control CD/DVD playback, by using the PLAY/ENTER, STOP, and direction buttons. To connect an iPod: 1 Make sure that the iPod and your shelf system are turned off. 2 Insert the iPod into the dock on top of your shelf system. Press down gently on the iPod® to make sure that the docking connector on the iPod makes contact with the docking connector in your shelf system. 8 www.insignia-products.com