Insignia NS-HF2003 User Guide - Page 15

STEP 8 - Assemble the drawers. Assembling the sides, drawer support, and front panels. You'll need 18 Front drawer panel (2) 14 Left drawer panel 15 Right drawer panel (2) (2) 17 Bottom drawer support (2) NS-HF2003 A Glue (1) 1 Place the drawer front (18) face down. 2 Put a drop of glue in the three dowel holes on the front panel. 3 Make sure that the rails on the side panels face out, then align the dowels and cam holes on the left and right side panels (14 and 15) with the cam screws on the left and right edges of front panel. Press the side panels and front panel together. 4 Align the dowel on the bottom drawer support (17) with the cam hole in the back edge of the front panel, then press the parts together. 5 Repeat this step on the other drawer. Attaching the bottom drawer panel. You'll need 16 Bottom drawer panel (2) 1 Slide the bottom drawer panel (16) into the grooves on the left drawer panel (14), right drawer panel (15), and front drawer panel (18). www.insigniaproducts.com 15