Insignia NS-HF2003 User Guide - Page 17
Attaching the back drawer panels., Align a handle
View all Insignia NS-HF2003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Attaching the back drawer panels. You'll need NS-HF2003 Right Left 13 Back drawer panel (2) F Small cam lock (10) I 4 × 32 × 8 mm screw (12) Flat blade screwdriver Phillips screwdriver 1 Align the back drawer panel (13) with the drawer side panels (14 and 15) and bottom drawer support (17). 2 Secure the back drawer panel to the side panels and drawer support using six 4 × 32 × 8 mm screws (I). 3 Insert small cam locks (F) into the cam lock holes on the side panels and drawer support, then tighten the cam locks. 4 Repeat this step on the other drawer. Attaching the drawer handles. You'll need N Handle (2) O Machine screw 4 × 21 × 8 mm (4) 1 Align a handle (N) with the holes in the center of the front drawer panel (18). 2 From the inside of the drawer, secure the handle with two machine screws 4 × 21 × 8 mm (O). 3 Repeat these steps for the other drawer. www.insigniaproducts.com 17