Insignia NS-HF2003 User Guide - Page 7
Assembly instructions, STEP 1 - Install the dowels and cam screws., You'll need
View all Insignia NS-HF2003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembly instructions WARNING: You need two people to assemble your TV stand. STEP 1 - Install the dowels and cam screws. You'll need NS-HF2003 A Glue (1) B Large wood dowel (16) C Cam screw (21) E Small wood dowel (6) Rubber mallet 1 Put a drop of glue in each dowel hole, then insert about 2/3 of each dowel (B or E) into the hole. Use a rubber mallet, if needed. Install the dowels (as shown). For more information see Installing dowels on page 6. 2 Screw the cam screws (C) into the cam screw holes (as shown). For more information, see Installing cam locks and cam screws on page 6. Top panel (1) Middle crossbar (5) Left side panel (6) www.insigniaproducts.com 7
www.insigniaproducts.com
7
NS-HF2003
Assembly instructions
STEP 1 - Install the dowels and cam screws.
You’ll need
1
Put a drop of glue in each dowel hole, then insert about 2/3 of each dowel (
B
or
E
) into the hole. Use a rubber mallet, if
needed. Install the dowels (as shown). For more information see Installing dowels
on page 6
.
2
Screw the cam screws (
C
) into the cam screw holes (as shown). For more information, see Installing cam locks and cam
screws
on page 6
.
Top panel (1)
Middle crossbar (5)
Left side panel (6)
WARNING:
You need two people to assemble your TV stand.
A
Glue (1)
B
Large wood dowel (16)
E
Small wood dowel (6)
Rubber mallet
C
Cam screw (21)