Insignia NS-HF2007 User Guide - Page 27

Step 20

Page 27 highlights

STEP 20: You need: NS-HF2007 DD Cam lock (12) Phillips screwdriver Using cam locks When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the cam lock opening. r 1 Insert one cam lock (DD) into each corner of the bottom of the upper shelf (E). 2 Insert one cam lock into each corner of the bottom of the base (A). 3 Insert two cam locks into the bottom of the left and right sides of the lower shelf (H). 4 Insert the six cam screws on the right side (K) into the cam locks, then tighten the cam locks with a Phillips screwdriver. 5 Insert the six cam screws on the right side (L) into the cam locks, then tighten the cam locks with a Phillips screwdriver. DD DD DD DD DD DD DD DD www.insigniaproducts.com 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

www.insigniaproducts.com
27
NS-HF2007
STEP 20:
You need:
Using cam locks
When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the
cam lock opening.
r
1
Insert one cam lock (
DD
) into each corner of the bottom of the upper shelf (
E
).
2
Insert one cam lock into each corner of the bottom of the base (
A
).
3
Insert two cam locks into the bottom of the left and right sides of the lower shelf (
H
).
4
Insert the six cam screws on the right side (
K
) into the cam locks, then tighten the cam locks with a Phillips screwdriver.
5
Insert the six cam screws on the right side (
L
) into the cam locks, then tighten the cam locks with a Phillips screwdriver.
DD
Cam lock (12)
Phillips screwdriver
DD
DD
DD
DD
DD
DD
DD
DD