Insignia NS-HF2007 User Guide - Page 31
Step 24
View all Insignia NS-HF2007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
STEP 24: You need: NS-HF2007 DD Cam lock (6) Phillips screwdriver When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the cam lock opening. 1 Insert two cam locks (DD) into the inside top edges of the left side (K), the right side (K), and the left top side of the small divider (Y). 2 Lay the top (G) onto the left and right sides. Make sure that the cam screws fit into the cam locks, 3 Tighten all cam locks with a Phillips screwdriver. DD DD DD DD DD DD www.insigniaproducts.com 31
www.insigniaproducts.com
31
NS-HF2007
STEP 24:
You need:
When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the
cam lock opening.
1
Insert two cam locks (
DD
) into the inside top edges of the left side (
K
), the right side (
K
), and the left top side of the
small divider (
Y
).
2
Lay the top (
G
) onto the left and right sides. Make sure that the cam screws fit into the cam locks,
3
Tighten all cam locks with a Phillips screwdriver.
DD
Cam lock (6)
Phillips screwdriver
DD
DD
DD
DD
DD
DD