Insignia NS-HF2007 User Guide - Page 7
Assembly instructions
View all Insignia NS-HF2007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Needed tool NS-HF2007 Phillips screwdriver Assembly instructions STEP 1: You need: B Left divider panel (1) C Right divider panel (1) AA 3 × 12 mm screw (6) CL DL DR CR BB Left and right rail assembly (2) Phillips screwdriver 1 Separate the CL and CR parts of the rail assembly (BB) from the DL and DR parts and set the DL and DR parts aside for use in another step. 2 Insert three 3 × 12 mm screws (AA) into the correct holes on the CL and CR parts of the rail assembly (BB). AA AA AA BB 3 Align the CL part of the rail assembly (BB) to the inside of the left divider panel (B). Make sure that the wheel on the assembly is at the back of the panel. 4 Tighten the screws with a Phillips screwdriver. AA AA AA CL 5 Align the CR part of the rail assembly (BB) to the inside of the right divider panel (C). Make sure that the wheel on the assembly is at the back of the panel. www.insigniaproducts.com 7