Insignia NS-HWG1655C User Manual English - Page 6
Assembly Instructions
View all Insignia NS-HWG1655C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
55" Wood Finish TV Stand ASSEMBLY INSTRUCTIONS Step 1: Preparing the top, bottom, side panels, and front Caution: Assemble your stand on a carpeted floor or on the empty box to avoid scratching your stand. • Screw 29 cam screws (1) into the holes in the top (A), bottom (G), sides panels (B and C), and front (H), then tighten with a phillips screw driver until the smooth portion of the cam screw is flush with the surface of the part. Use the holes indicated. You'll need: Phillips screwdriver 1 Cam screw (29) 6 www.insigniaproducts.com
6
55” Wood Finish TV Stand
www.insigniaproducts.com
ASSEMBLY INSTRUCTIONS
Step 1: Preparing the top, bottom, side panels, and front
Caution:
Assemble your stand on a carpeted floor or on the empty box to avoid scratching your stand.
•
Screw 29 cam screws (
1
) into the holes in the top (
A
), bottom (
G
), sides panels (
B
and
C
), and front (
H
),
then tighten with a phillips screw driver until the smooth portion of the cam screw is flush with the
surface of the part. Use the holes indicated.
You’ll need:
1
Cam screw
(29)
Phillips screwdriver