Insignia NS-HWG1655C User Manual English - Page 9
Step 4, Attaching the top, You'll need
View all Insignia NS-HWG1655C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
55" Wood Finish TV Stand Step 4: Attaching the top 1 Carefully stand the unit on its legs, then insert eight hidden cams (2), as shown, into the large holes in the side panels (B and C) and the middle panels (D and E). 2 Align the top (A) with the front/bottom/panel assembly and push the cam screws into the holes with the hidden cams in the side and middle panels. 3 Tighten each hidden cam with a Phillips screwdriver as tight as possible (about 180°). 4 Using the Allen wrench (8), secure the top to the front/bottom/panel assembly with three 1/4" bolts (5), 1/4" flat washers (7), and lock washers (6). All of the doors on the front piece need to be open to access the holes for the three 1/4" bolts. Leave all the doors on the front (H) open to make it easier to attach the cabinet pulls later. You'll need: 2 Hidden cam (8) Phillips screwdriver 8 Allen wrench (1) 5 1/4" bolt (3) 6 Lock washer (3) www.insigniaproducts.com 7 Flat washer (3) 9