Insignia NS-HWG1655C User Manual English - Page 7
Steps 2, Attaching the middle panels and side panels to the bottom, You'll need
View all Insignia NS-HWG1655C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
55" Wood Finish TV Stand Steps 2: Attaching the middle panels and side panels to the bottom 1 Insert eight hidden cams (2) into the large holes in the middle panels (D and E), and the shorter sides of the bottom (G). The arrow in the hidden cam must point toward the hole in the edge of the panel. 2 Stand the middle panels (D and E) on the bottom (G), as shown, then push the holes with the hidden cams onto the cam screws on the bottom. The edges without the wooden pegs on both middle panels and the bottom panel should point in the same direction. 3 Tighten each hidden cam with a Phillips screwdriver as tight as possible (about 180°). 4 Turn over the middle panel/bottom assembly and push the holes with the hidden cams on the bottom onto the cam screws on the side panels (B and C). The edges with the wooden pegs on the side panels should be pointing the same directions as the middle panels. 5 Tighten each hidden cam with a Phillips screwdriver as tight as possible (about 180°). You'll need: Phillips screwdriver 2 Hidden cam (8) www.insigniaproducts.com 7