Insignia NS-HWMC1848 User Guide - Page 19

3-in-1 TV STAND Step 3: Option 1 - Mounting bracket instructions for a TV with a flat back To mount the TV brackets: 1 Insert the selected bolts through the washers and proper mounting holes on the TV brackets (P) (for the 100 x 100 mm vesa pattern you'll need to lift the bracket hangers to insert the screws), then finger tighten them into the threaded holes on the back of your TV. Make sure the TV brackets are centered and level with each other and the hooks face the bottom of the TV. NOTE: Lean the TV up against a wall or other solid surface when attaching with the TV brackets. DO NOT place the TV face down on the glass, this may cause permanent damage. 2 Tighten the bolts until they are snug against the TV bracket using a Phillips screwdriver. DO NOT over tighten. HH JJ LL NNor PP SS TT UUor VV YY ZZ or Installing the mounting brackets for the 100 x 100 mm vesa hole pattern HH JJ LL NN or PP SS TT UUor VV YY or ZZ HH JJ LL NN or PP YY or ZZ You'll need: Bolts & Washers or or or HH (4) JJ (4) LL (4) or NN (4) or or or SS (4) TT (4) UU (4) VV (4) PP (4) Level Phillips screwdriver or YY (4) ZZ (4) SS TT UU or VV P TV brackets (2) www.insigniaproducts.com 19