Insignia NS-MC60SS8 Documentation - Page 10
Opening the cover safely
View all Insignia NS-MC60SS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
NS-MC60SS8_17-0691_MAN_V1_ENG.fm Page 10 Tuesday, September 12, 2017 11:32 AM NS-MC60SS8 8 Turn the exhaust valve handle to the Sealing icon, indicating that the multi-cooker is in airtight condition. Sealed position Venting position Notes • To manually exhaust the multi-cooker, turn the exhaust valve to the Venting icon. • Make sure that the float valve has fallen. 9 Plug in the multi-cooker. 10 After each use, remove any foreign objects or materials from the rubber gasket and anti-block shield. Keep these items clean to avoid odor. Cautions • Never pull the rubber gasket. Pulling the gasket may deform it, affecting the sealing and pressure of your cooker. • Never use your multi-cooker with a damaged gasket. If your cooker has a damaged gasket, it should be sent to the service center for replacement. Opening the cover safely Cautions • Do not open the lid before the pressure in the pot has been completely released. • Do not force the lid if it is difficult to open. • Do not pull out the exhaust valve when turning it. • After cooking a large amount of food, do not immediately open the vent. Allow it to cool for a short while before opening the lid. 1 Unplug the multi-cooker. 2 Make sure that the pressure is released. • For solid foods: You can either turn the exhaust valve to the "Venting" position until the float valve falls or put a wet towel on the cover to quicken cooling until the float valve falls. 10 www.insigniaproducts.com