Insignia NS-OTR17SS3 Installation Guide - Page 21
Step 8: Option A (recirculating) - Installing or changing the charcoal filter, Charcoal filter
View all Insignia NS-OTR17SS3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
1.7 Cu. Ft. Over-the-Range Microwave Step 8: Option A (recirculating) - Installing or changing the charcoal filter You'll need: Phillips screwdrivers For models without the recirculation filter access, follow these steps to replace or install a charcoal filter. 1 Unplug the microwave oven or disconnect the power. 2 Open the microwave door and remove the two vent mounting screws located on top of the microwave using a #1 Phillips screwdriver. Screws 3 Remove the charcoal filter by pushing the top of the filter inwards, then pull it forward out from the unit. Charcoal filter www.insigniaproducts.com 21
www.insigniaproducts.com
21
1.7 Cu. Ft. Over-the-Range Microwave
Step 8: Option A (recirculating) - Installing or changing the charcoal filter
For models without the recirculation filter access, follow these steps to replace or install a charcoal filter.
1
Unplug the microwave oven or disconnect the power.
2
Open the microwave door and remove the two vent mounting screws located on top of the microwave using a #1
Phillips screwdriver.
3
Remove the charcoal filter by pushing the top of the filter inwards, then pull it forward out from the unit.
You’ll need:
Phillips screwdrivers
Screws
Charcoal filter