Insignia NS-P10DVD18 User Guide - Page 11

10" Portable DVD Player 2 Plug the connectors on an RCA cable (not included) into the connectors on the other end of the AV adapter cable. Make sure that the colors on the connectors match. 3 Plug the other end of the RCA cable into the AV jacks on the TV or monitor, making sure to match the colors on the connectors with the jacks on the TV (or monitor). 4 Turn your TV or monitor on. Note You may have to select the correct input on your TV or monitor. Using your player Turning on your player To turn on your player: 1 Slide the ON/OFF switch on the side of your player to the ON position. 2 The start-up picture (DVD VIDEO) appears on the screen. 3 After use, slide the ON/OFF switch to the OFF position. Playing a DVD or audio CD Notes • Most DVDs and your player have region codes that help control illegal distribution of DVDs. The region code for your player is 1. You can only play DVDs with a region code of 1 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging. • This User Guide explains the basic instructions for operating this unit. Some DVDs are produced in a manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in question for more information about the options available on that DVD. • " " may appear on the screen during operation. A " " means the desired operation is not permitted by the unit or disc. To play a disc: 1 Make sure that your player is connected to power or that the battery is charged. 2 Slide the ON/OFF switch on the side of your player to the ON position. 3 Press the open ( ) button to open the disc door. The disc door opens. 4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing automatically. If playback does not begin automatically, press on the player. www.insigniaproducts.com 11