Insignia NS-PMMD22 User Guide - Page 4
Package contents, VESA mount patterns, Parts, Hardware, Tools required
View all Insignia NS-PMMD22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Package contents Parts Make sure that you have all the parts necessary to assemble your new monitor mount: Cable support brackets (pre-installed) # PART 1 Tube cover 2 Monitor support arm 3 Monitor support tube QTY. 2 1 1 # PART 4 Support base 5 Base clamp 6 Anti-slip rubber pads Hardware Make sure that you have all the hardware necessary to assemble your new monitor mount: QTY. 1 1 2 A M4 x 12 mm (8) B M5 x 12 mm (8) C M6 x 20 mm (3) D M6 x 10 mm (2) E 6.5 x 13x2 (16) Note: You may not use all the included hardware. Tools required Make sure that you have the tools necessary to assemble and install your new monitor mount: Phillips screwdriver (not provided) F 4 x 4 mm Allen wrench G 5 x 5 mm Allen wrench (provided) (provided) VESA mount patterns Your monitor mount works with the following VESA screw hole patterns: • 75 × 75 mm (3 × 3") • 100 × 100 mm (3.9 × 3.9") 4 www.insigniaproducts.com