Insignia NS-PMMD22 User Guide - Page 5

75 × 75 mm (3 × 3") or 100 × 100 mm (3.9 × 3.9") NS-PMMD22 Installation instructions STEP 1: Preparing your monitors 1 Make sure that your monitors have screw holes on the backs for VESA mounting. You can use monitors with VESA mounting patterns of 75 × 75 mm (3 × 3") or 100 × 100 mm (3.9 × 3.9"). 75 × 75 mm (3 × 3") or 100 × 100 mm (3.9 × 3.9") 2 Remove the bases or stands from your monitors. STEP 2: Attaching your monitor mount to a desktop edge Notes: • Make sure that the tabletop or desktop is square or rectangular. Your mount may not fit securely to an oval or irregularly shaped surface. • Make sure that the tabletop or desktop thickness is between .8 and 3.9 inches (2 and 10 cm). Select the position on the desk where you want your monitor mount installed. Make sure that there is enough room for your monitors. The desk should be between .8 in. (2 cm) and 3.9 in. (10 cm) thick and strong enough to bear the weight of your monitors. Note: You need a Phillips screwdriver for this step. 1 Align the support tube (3) bottom with the three holes in the support base (4), then secure the tube using three M6 × 20 mm screws (C). Tighten the screws using the 4 x 4 Allen wrench (F). www.insigniaproducts.com 5