Insignia NS-RTM18BK8Q User Guide - Page 13

Remove the screw hole covers on the other side where the bottom hinge will

Page 13 highlights

18 Cu. Ft. Top Mount Refrigerator 4 Unscrew the three screws holding the center hinge, remove the hinge, then lift the refrigerator door up and away from your refrigerator. Save the screws to reuse and store the hinge in a safe place, in case you need to reverse the door position again. 5 Remove the screw hole covers on the other side where the center hinge will be installed. Save them to be reused. Center hinge 6 Unscrew the two screws holding the bottom hinge, then remove the bottom hinge from the refrigerator. 7 Remove the screw hole covers on the other side where the bottom hinge will be installed. Save them to be reused. 8 Unscrew the hinge pin from the bottom hinge and move it to the other hole in the hinge pin, then secure the bottom hinge to the left side of the refrigerator using the screws you removed previously. Reattach the bottom hinge Hinge pin Remove the bottom hinge Hinge pin www.insigniaproducts.com 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

13
18 Cu. Ft. Top Mount Refrigerator
www.insigniaproducts.com
4
Unscrew the three screws holding the center hinge, remove the hinge, then
lift the refrigerator door up and away from your refrigerator. Save the screws
to reuse and store the hinge in a safe place, in case you need to reverse the
door position again.
5
Remove the screw hole covers on the other side where the center hinge will
be installed. Save them to be reused.
6
Unscrew the two screws holding the bottom hinge, then remove the bottom
hinge from the refrigerator.
7
Remove the screw hole covers on the other side where the bottom hinge will
be installed. Save them to be reused.
8
Unscrew the hinge pin from the bottom hinge and move it to the other hole in
the hinge pin, then secure the bottom hinge to the left side of the refrigerator
using the screws you removed previously.
Center hinge
Remove the bottom hinge
Reattach the bottom hinge
Hinge pin
Hinge pin