Insignia NS-RTM18BK8Q User Guide - Page 9

Using your refrigerator Setting the refrigerator temperature 18 Cu. Ft. Top Mount Refrigerator # ITEM DESCRIPTION 1 SET button Press to change the refrigerator setting from 1 (cold) to 5 (coldest). 2 LED indicators Light to show the current refrigerator setting. 3 STANDBY LED Lights to indicate when the refrigerator is in standby mode (refrigerator and freezer are turned off ). • The first time you turn the refrigerator on, the control panel LEDs turn on for three seconds, then displays the current setting (default = 3). Your refrigerator runs continuously for several hours until it reaches the preset temperature. After your refrigerator is fully cooled, you can adjust the temperature up or down to your personal preference. • To temporarily suspend cooling in the refrigerator and freezer, press and hold the SET button for three seconds. The STANDBY LED turns on and cooling is turned off. Press the SET button again to cancel standby mode and resume cooling. Notes: • If the refrigerator is unplugged or loses power, you must wait three to five minutes before restarting it. If you attempt to restart before this time delay, the refrigerator will not start. • Large amounts of food will lower the cooling efficiency of the refrigerator. • If you choose to change the thermostat setting, adjust it by one increment at a time. Allow 24 hours for the temperature to stabilize between adjustments. www.insigniaproducts.com 9