Insignia NS-TDRG67W1 User guide - Page 15
Exhausting requirements, WARNING, NEVER USE A PLASTIC OR NON-METAL FLEXIBLE DUCT
View all Insignia NS-TDRG67W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
INSTALLATION INSTRUCTIONS 12-Cycle Electric and Gas Dryers Exhausting requirements WARNING: • Do not exhaust your dryer into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space in a building. • Your dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or closet. WARNING: NEVER USE A PLASTIC OR NON-METAL FLEXIBLE DUCT • If your existing duct work is plastic, non-metal, or combustible, replace it with metal. • Use only a metal exhaust duct that is non-flammable to ensure containment of the exhaust air heat and lint. • All dryers must be exhausted outside. • Do not assemble the duct with screws or other fasteners that extend into the duct or that catch lint. • The exhaust duct should be 4 in. (10.2 cm) in diameter. • The total length of flexible metal duct should not exceed 7.8 ft. (2.4 m). See Duct requirements on page 16 for the maximum duct length and number of elbows. www.insigniaproducts.com 15